- +

Oferta IT

OFERTA SISTEME PC - PERIFERICE IT - COMPONENTE PC - CRAIOVA



Currently:
  • Resetare hardware "Canon MP" 150, 160, 170, 180 - error E5, E8, etc 5 1

Author Topic: Resetare hardware "Canon MP" 150, 160, 170, 180 - error E5, E8, etc  (Read 3965 times)

0 Members and 1 Guest are viewing this topic.

Offline Pamico

Resetare hardware "Canon MP" 150, 160, 170, 180 - error E5, E8, etc


Cele mai comune erori afisate la aceste modele de imprimante sunt "E 5" si "E 8" !

Mai jos aveti o lista ce contine codurile de eroare care incep cu "E":

• E2-2 = No paper (ASF)
• E3-3 = Paper jam
• E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge
is installed, or the ink cartridges are not installed properly

E8 = Waste ink absorber full, or platen waste ink absorber full
• E9 = The connected digital camera / video camera does not support Camera
Direct Printing
• E14 = The Ink cartridges whose destination are wrong
• E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
• E16 -E19 = Failed to scan head alignment sheet
• E22 = Carriage error
• E23 = Paper feed error
• E24 = Purge unit error
• E25 = ASF(cam) sensor error
• E26 = Internal temperature rise error
• E27 = Waste ink absorber full or platen waste ink absorber full
• E28 = Ink cartridge temperature rise error -
• E29 = EEPROM error
• E33 = Paper feed position error
• E35 15 = USB Host VBUD overcurrent error - USB
• E37 17 = Abnormal motor driver error
• E40 20 = Other hardware error
• E42 22 = Scanner error

Pentru a reseta erorile mai sus amintite, se procedeaza conform pasilor de mai jos, in functie de eroarea aparuta:

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below. (Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)


The number of the Reset button pressing:

Observati cu atentie culoarea LED-urilor !

• 0 time Green Power off
• 1 time Orange Service pattern print
• 2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset. See waste ink counter reset
procedures below.

• 5 times Orange Destination setting See Destination setting
procedures below.
• 6 times Green Print head deep cleaning
• 11 times Orange Button / LCD checking
• 12 or more times Returns to a menu selection

Dupa ce ati realizat procedura de mai sus, se scoate imprimanta din priza, se asteapta circa 20 de secunde dupa care se alimenteaza din nou si se porneste. Daca pasii s-au efectuat corect, mesajul de eroare de pe afisaj ar trebui sa dispara.

Atentie, resetarea cartuselor (3 times - EEPROM reset), nu va functiona decat in cazul cand aceste sunt bune din punct de vedere electric. Altfel resetarea nu va functiona si mesajul de eroare "E 5" va persista pe afisaj !

Succes !


[img width= height= alt=Forum Craiova Center - stiri, divertisment, informatii utile, anunturi si multe altele" title="Forum Craiova Center - stiri, divertisment, informatii utile, anunturi si multe altele]http://www.craiovacenter.com/Poze2/daca-ti-a-placut.png[/img]